Speaking of HVAC regulation, it is really a very important thing, but many people may not understand the comprehensive! HVAC, it is the abbreviation for heating, ventilation and air conditioning. It can make our indoor environment very comfortable.
The key to regulating HVAC, let’s first look at the setting temperature. Appropriate temperature setting will save a lot of energy consumption. In winter, the indoor area should not be set to exceed 22℃. If the setting is 2-3℃, the energy consumption may be reduced by a considerable proportion – it is said that it can save 10% to 15%! In summer, the setting should not be lower than 25℃.
1. Here we need to use an intelligent temperature control system, which can flexibly switch the indoor temperature settings according to our scheduled schedule.
There is also a ventilation system. It is also very important to have good ventilation. It is not only clean air, but also good for health. For example, if someone smokes at home and there are more odors and harmful gases, they must be ventilated immediately. There are two ways of ventilation. Natural ventilation is generally implemented through windows; mechanical ventilation is the other way, and it depends on exhaust fans and ventilation ducts to help the air flow. If the home is more closed, mechanical ventilation is recommended. It can be connected with the air conditioner in the home to keep the circulation smooth.
2. Also, you must maintain and clean the filters in the HVAC equipment. If the filters are dirty and the wind is difficult to pass, the equipment will have to toss under a larger load when it is running, so that energy consumption will increase! The life of the equipment is easily reduced
We need to do more energy conservation. Swapping old HVAC for products with higher energy efficiency is one way; it can also reduce the consumption of non-essential time by time-shutting the equipment. When people fall asleep at night, they are actually less sensitive to the environment, which can lower the air conditioner air conditioner or slightly increase the temperature setting.
There are often questions that we have to talk about. For example, if it is set to be an intermittent switch, or it is running at low power, which one is more energy-saving? Generally speaking, keeping the equipment running in a low-power state is more energy-saving, and the power required for intermittent switches to start again will be greater each time. This gap between up and down has a big gap in energy consumption.
And there must be space around the equipment! When placing, be sure to clean the surrounding area before installing; pay attention to the equidistance between HVAC and furniture, as it will block ventilation if it is too close. Keep a minimum spacing of 30 cm
3. You can install a temperature sensor on the pipeline. If the temperature in the pipeline is particularly low and energy consumption is increased, isn’t there any leakage problem that needs to be repaired and troubleshooted? This requires professional maintenance personnel to thoroughly fix it. So it really needs to be done like finding people to see the HVAC situation regularly.
When installing the fresh air system, it also requires the introduction and export of fresh air to consider the direction of pollutant discharge and the local dominant wind direction. For example, if the main traffic road next to your home, the air placed near the street is not clean and will suck in dirt. You need to adjust the position to ensure normal operation and bring fresh air.
4. The noise is also a point that people often worry about! Using the method of installing a muffler, choose a good quality HVAC, its ability to attenuate noise is particularly good.
Then from a climate perspective, how should it be regulated? The climates of different geographical spaces vary greatly in many cities. If you are in winter, it will continue to snow and cold for a long time – like in Harbin – we have to pay attention to thermal efficiency; if it is in a mild area or a short-term seasonal temperature extreme, then the air conditioner temperature control and ventilation settings will be slightly more flexible and maneuverable.
How to improve the local temperature in the room after setting up, it is another headache. Perhaps partitioning can solve this problem! Separate the large open space into several closed small spaces with something, and adjust its temperature with each partition alone or set the wind angle toward the local temperature to make the whole situation almost balanced.
5. When managing the partition, different user needs should be considered separately. Set different parameters for the elderly’s rooms to ensure comfort! You can also rely on the floor heating and air conditioning system to adjust. The combination of the two complements each other very well.
For me, I feel that the HVAC system is as smooth as the meridians of the human body in my home. The feeling of home is better. The rewards it generates after real investment in energy-efficient equipment and maintenance inspections can really make everyone happy in the future. If people are satisfied with the regulation of their own living areas, their work and study will be more efficient. Therefore, it is too cost-effective to be more careful in HVAC regulation.
發佈留言